Milwaukee 2820-20 Manual Del Operador página 4

FUNCTIONAL DESCRIPTION
1. Tank
2. Tank cap
3. Wand storage location
4. Carry handle
5. Spray wand
6. Trigger lock-on ^
7. Trigger handle ^
8. Trigger lock-off ^
9. Shoulder straps
10. Hose
2
1
Cat. No.
49-16-28PS
49-16-28CS
19
20
18
17
21
16
22
23
29
24
11. Tank hook receptacle
12. Waist strap
13. Adjustable nozzle ^
14. Nozzle holder
15. Battery compartment
16. Battery compartment latch
17. Tank latch
18. Flow rate dial
19. On/Off switch
20. On/Off light
21. Water nozzle *
22. Adjustable nozzle ^
23. Fan nozzle ^
24. Strainer
25. Tank hooks
26. Gallon markings
27. Liter markings
28. Drain cap
29. Measuring cup ¤
* 49-16-28WS only
^ 49-16-28PS and 49-16-28CS only
8
7
6
5
4
3
15
25
28
Cat. No.
49-16-28WS
¤ 49-16-28PS only
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
9
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
10
may be hazardous.
3 Connecting the Spray Wand to the Trigger
(Cat. No. 49-16-28PS, 49-16-28CS)
11 1. Insert the spray wand into the trigger
handle (1) until firmly seated.
2. Slide the nut onto the threaded coupling
and hand tighten securely (2).
3. Pull on the spray wand to be certain it is
properly secured.
4. Place the assembled trigger handle and
12
wand into one of the wand storage loca-
tions.
Connecting the Nozzles
13 (Cat. No. 49-16-28PS, 49-16-28CS)
Select and screw on nozzle by job type. When using
the adjustable nozzle, adjust spray pattern as desired
by tightening/loosening the nozzle.
14
Connecting Water Supply or Nozzle
26
To attach water supply hose to the tool or
nozzle, push the quick connect fitting and
tool/nozzle together (1). Pull on the connec-
27
tion to be certain it is properly secured. To
remove, pull the collar back to release (2).
When using the nozzle, adjust spray pattern
as desired by tightening/loosening the noz-
zle.
WARNING
Ensure battery door is closed and latched when-
ever chemicals are present.
Mix chemicals per manufacturer's instructions.
Failure to follow instructions may cause harsh
chemicals to injure user or damage tool.
A removable strainer prevents debris that can clog
or damage the pump from entering thetank. Label
tank contents accordingly during each use. Only
put recommended liquids in tank. Only use water in
water supply tank.
1. Ensure the battery door is closed securely.
2. Remove the tank from the base and
set on a level surface away from the
base to prevent exposing the base
to harsh chemicals.
3. Unscrew and remove the tank cap;
ensure strainer is in place.
4. Fill the tank (up to 4 gallons; do not
overfill). Use the gallon markings on
the side of the tank as a guide.
5. Reinstall the tank cap.
6. Reinstall the tank.
4
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always remove battery pack before
changing or removing accessories.
Only use accessories specifically
recommended for this tool. Others
Handle
(Cat. No. 49-16-28WS)
Filling the Tank
Before filling the tank, remove the
tank from the base.
2
1
1
2