URSUS TROTTER UT-HIDROXPERTEN2 Manual De Usuario página 15

ASSEMBLY
Mount loose parts delivered with appliance prior to
start-up
You will need the 2 included screws as well as a
screwdriver PH 2
1.Installing the handle
• Attach the handle
• Secure the handle by means of two screws
1. Installing the handle (cont'd.)
2. Installing storage for spray lances
• Hook in storage for spray lances.
• Secure the storage for the spray lances by means
of two screws.
3 Installing the connector of water inlet
• Insert the connector into the water inlet
3.Installing the connector of water
inlet (cont'd.)
4 Installing the spray wand
• Fit the spray wand into the gun and rotate it until
the two parts are completely locked.
* Make sure the connection nipple is aligned correctly
5 Connect the high pressure hose to the trigger gun
(cont'd.)
• Check the secure connection by pulling on the high
pressure hose.
START UP
Park the appliance on an even surface.
Insert the mains plug into the socket.
Water supply
For connection values, see type plate.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. Water supply from mains
5 Connect the high pressure hose to the trigger gun
• Screw the coupling element to the water
connection on the appliance.
• Attach the water supply hose to the coupling on
the water connection.