Little Giant EGGLITE Manual De Instrucciones

Franklin Electric Co., Inc.
Franklin Electric Co., Inc.
Oklahoma City, OK 73127
P . O. Box 12010
www.lg-outdoor.com
Oklahoma City, OK 73157-2010
[email protected]
Phone: 405-947-2511 • Fax: 405-947-8720
www.LittleGiantPump.com
[email protected]
EN
This instruction sheet provides you with the information required to
safely own and operate your product. Retain these instructions for
future reference.
The product you have purchased is of the highest quality workmanship
and material, and has been engineered to give you long and reliable
service. This product has been carefully tested, inspected, and
packaged to ensure safe delivery and operation. Please examine your
item(s) carefully to ensure that no damage occurred during shipment.
If damage has occurred, please contact the place of purchase. They
will assist you in replacement or repair, if required.
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
TO INSTALL, OPERATE, OR SERVICE YOUR PRODUCT. KNOW
THE PRODUCT'S APPLICATION, LIMITATIONS, AND POTENTIAL
HAZARDS. PROTECT YOURSELF AND OTHERS BY OBSERVING
ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH THESE
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
SAFETY GUIDELINES
WARNING: The transformer and all connections must remain dry.
To reduce the risk of electrical shock, connect only to a properly
grounded, grounding-type receptacle.
The National Electric Code and many local building codes require the
use of a ground fault circuit interrupter (GFCI) on the branch circuit
supplying fountain equipment rated above 15 volts.
Do not use an extension cord to supply power to the transformer for
outdoor installations.
Always disconnect the electrical power and remove the light from the
water before attempting any maintenance.
This light has not been investigated for swimming pool or spa use.
Use the LED Egglites only with the Little Giant transformer. Use of any
other transformer may damage the light and will void the warranty.
ASSEMBLY
1. Ensure that your LED Egglite® kit contains the following items:
• Two LED Egglites
• Transformer (kit LCE2 only)
• Three-way connector
• O-ring packet
O-ring
Joint torique
Junta tórica
FIGURE 1 • FIGURE 1 • FIGURA 1
LED EGGLITES
LED EGGLITES AND
®
TRANSFORMER
TRANSFORMER
DEL EGGLITES DEL EGGLITES
®
TRANSFORMATEUR
TRANSFORMATEUR
LED EGGLITES
®
LED EGGLITES
TRANSFORMADOR
TRANSFORMADOR
ENGLISH
WARNING
Connector
Connecteur
Conector
Light plug
Fiche
Enchufe de luz
AND
®
ET
ET
®
Y
Y
®
2. To ensure a waterproof connection, place an o-ring onto each light
plug (Figure 1). NOTE: The factory may have already installed the
o-rings but please check before installation.
3. Insert each of the two light plugs into a receptacle on the three-
way splitter (Figure 2), then tighten the connectors. NOTE:
Align the flat sides on the plugs and the receptacles for proper
polarization (Figure 2). If plugs are not inserted correctly the lights
will not illuminate.
4. Connect additional lights (sold separately) to the third receptacle
on the three-way connector (Figure 3).
5. Insert the power cord plug into the transformer receptacle, then
tighten the connector.
6. Coil the pliable cord on each LED EggLite® so that the light stands
on its own, or wrap the cord around foliage or fountain heads.
LED EggLites® can be used dry or submerged. The transformer in
LED EggLite® kit LCE2 will operate up to 12 LED Egglites®. Extra
LED EggLite® kit LXE2 is available without the transformer.
1. Connect the transformer to a grounded 120-volt outlet. WARNING:
The transformer and all connections must remain dry.
2. Check to ensure that all EggLites® illuminate.
Cette feuille d'instructions vous fournit les informations nécessaires
pour entretenir et faire fonctionner votre produit. Conserver ces
directives afin de pouvoir les consulter plus tard.
Le produit que vous avez acheté a été soigneusement fabriqué
avec des matériaux de la plus haute qualité et a été conçu
pour durer longtemps et offrir un service fiable. Ce produit a été
soigneusement testé, inspecté et emballé afin d'en assurer la sécurité
de fonctionnement et une livraison en bon état. Vérifier attentivement le
ou les produits afin de vous assurer qu'ils n'ont pas été endommagés
pendant le transport. Si des dommages sont détectés, veuillez
contacter l'entreprise qui vous l'a vendu. Si une réparation ou un
remplacement est requis, elle vous prêtera assistance.
LIRE ATTENTIVEMENT CES DIRECTIVES AVANT DE PROCÉDER
À L'INSTALLATION, À L'UTILISATION OU À L'ENTRETIEN DU
PRODUIT. SE FAMILIARISER AVEC LES APPLICATIONS, LES
IMPORTANT! • IMPORTANT! • ¡IMPORTANTE!
Three-way connector receptacle
Prise pour connecteur à trois voies
Receptáculo del conector triple
OPERATION
WARNING
FRANÇAIS
FR
Align flats
Aligner les plats
Planos de alineación
FIGURE 2 • FIGURE 2 • FIGURA 2
Light plug
Fiche
Enchufe de luz
1