Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Setting and storing personal data in memory
You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The monitor can store personal details for up to 4 people.
1.Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a Personal Key
turns on the unit.) The unit will beep to confirm activation, the Personal Key numbers
(1,2,3,4) will be displayed, and the display will flash.
Note : If you don't operate the unit for sixty seconds after the unit has been turned on,
the unit will turn off automatically.
Note : If you make a mistake or want to turn the unit off before you have finished programming it, press the
Weight-Only Key (
) to force quit.
2.Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the Personal Key number you
wish to use, press the Set button. The unit will beep once to confirm.
3.Set Age
The display defaults to Age 30 (range of user age is between 7-99). An arrow icon appears on the
lower left side to indicate Age setting. Use the Up/Down buttons to scroll through numbers. When you
reach your age, press the Set button. The unit will beep once to confirm.
4.Select Female or Male
Use the Up/Down buttons to scroll through Female (
Male/Athlete settings, then press the Set button. The unit will beep once to confirm.
5.Specify the Height
The display defaults to 5' 7.0" (170cm) (range of user is from 3' 4.0"–7' 3.0" or 100cm – 220cm). Use
the Up/Down buttons to specify Height and then press the Set button. The unit will beep once to con-
firm.
6.Select Activity Level
To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.
Use the Up button to specify Activity Level. Press the Set button to confirm.
Level 1 = Inactive lifestyles (little or no exercise)
Level 2 = Moderately active lifestyles (occasional, low intensity exercise)
Level 3 = Adult involved in intense physical activity (see p.1. for Tanita's definition of Athlete)
Note : If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.
The unit will beep twice and the display will flash all data (Male/Female, Age, Height, Activity Level, etc.) three times to confirm
the programming. The power will then shut down automatically.
4
) or Male (
), Female/Athlete and
Operation with Bluetooth (Using Personal key)
1) Before activating the scale, make sure the corresponding Bluetooth device is turned on.
2) Press the personal key to turn on the scale, as noted by a single beep.
3) Within 60 seconds, activate the communication sequence within the Bluetooth device to initiate
the pairing process with the scale.
If 60 seconds is exceeded an error message will appear, see page9 for error message codes.
*If you want to use the scale without activating Bluetooth, press the OFF key to turn off the scale,
while PCSET is displayed, Press your personal key again (within 60 seconds) to turn the scale
on, the Bluetooth function will now be deactivated and you can measure body composition.
4) The pairing process is completed on the corresponding Bluetooth device and the scale, as noted
by a double beep.
5) All the Pre-stored personal data will be displayed one by one.
6) The unit will beep again and the display will show " 0.0 ". Now step onto the platform.
5
Tabla de contenido
