Enabling The Accessory Modules; Configuring Digital Output Modules - CARLO GAVAZZI WM20 Manual De Instrucciones

Enabling the accessory modules

The accessory modules must be enabled. The enable command can be automatic or
manual.
Enable
Automatic
Manual
NOTE *: module enabled only if no other communication module has been installed.

Configuring digital output modules

The digital outputs of modules M O R2 and M O O2 canbe assigned with three different
functions:
Function
Alar
50
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
Description
The module is automatically detected and
enabled
The module must be enabled via the
settings menu, see "Settings menu" on
page 24
Description
Alarm: output associated with an alarm and
directly managed by WM20
Modules
• M C ETH
• M C BAC IP
• MC BAC MS
• M C PB
• M O R2
• M O O2
• M C 485232 *
Parameters
• Alarm associated (Al
link) *
• Status of the digital
output in non-alarm
status (Al status)