Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English / USA
2
1
3
Mounting the gearbox
:
Release the clamp screw (1).
:
Slide the gearbox (2) onto the drive
tube (3), turning the gearbox back
and forth at the same time.
12
4
6
5
:
Once the end of the drive tube is
inserted beyond the slot in the
clamp (4) – ease the rubber sleeve
to one side to check this – push the
gearbox right up to the stop.
:
Fit clamp screw and tighten as far
as stop.
:
Line up the gearbox (2) on the drive
tube so that the machine support (5)
on the powerhead points downward
and the output shafts (6) are
horizontals.
:
Tighten the clamp screws firmly.
:
Go to "Mounting Sweeper Drums".
Mounting Sweeper Drums
1
:
Fit grass shield (1) on end of
axle (2) and press home as far as
stop.
6
2
:
Push axle (2) onto the output
shaft (3).
:
Insert pin (4) through axle and
output shaft. Secure pin with cotter
pin (5).
2
4
3
2
5
KW
Capítulos
Tabla de contenido
