How To Use - Panasonic NT-DP1 Instrucciones De Funcionamiento

How to Use

Plug in and insert the slice(s) of bread into the insertion slots.
1
Note
 ●
Make sure the crumb tray is clean and set in place correctly before plugging in.
 ●
When toasting a slice of bread, use either insertion slot.
Lower the toast lever until it locks.
2
 ●
The number of the selected level on the browning level indicator
will light up until toasting is completed.
 ●
After a period of time, the indicator starts flashing from level 1, and
rises up the indicator as browning progresses, up to the selected
level.
 ●
The toast will pop up automatically. If the toast do not pop up fully,
lift the toast lever up manually.
 
To change toasting color.
The toaster memorises the previous setting. If you wish to change setting, press the browning control button
shortly after following steps 1 and 2 in "Toasting bread".
The browning level indicators will light up and change each time the button is pressed.
Note
 ●
When toasting a single slice of bread, the colour will be darker than that
when toasting two slices of bread.
 ●
Toasting colour may vary depending on the thickness and type of
bread, as well as the room temperature and humidity.
(Dry bread browns faster than fresh bread.)
 
To toast frozen bread
Press the defrost button shortly after following steps 1 and 2 in "Toasting
bread".
 
To reheat toast
Press the reheat button shortly after following steps 1 and 2 in "Toasting
bread".
Note
 ●
The browning control cannot be applied to the reheat function.
 
To cancel toasting or reheating bread
Press the stop button to cancel toasting bread.
The toast lever will lift up and bread will pop up.
Note
 ●
The defrost and reheat buttons light up when they are pressed.
If the buttons are pressed again while light stayed on, the selected
function will be canceled and toasting function will be activated.
12
~Toasting bread~
e.g. When it set on 4.
(
Browning control range is from 1 to
5 on NT-DP1.
(Darker)
(Lighter)
)