Tabla de contenido
MIDI Implementado
Omni Off (Controller number 124)
status
2nd byte
BnH
7CH
* The same processing will be done as when an All Note Off message is received.
Omni On (Controller number 125)
status
2nd byte
BnH
7DH
* The same processing will be done as when an All Note Off message is received.
Mono (Controller number 126)
status
2nd byte
BnH
7EH
mm=mono number: 00H–10H (0–16)
* The same processing will be done as when an All Note Off message is received.
Poly (Controller number 127)
status
2nd byte
BnH
7FH
* The same processing will be done as when an All Note Off message is received.
System Exclusive messages
status
data byte
F0H
iiH, ddH, ......, eeH
F0H:
System Exclusive message status
ii = ID number:
This is the ID number (manufacturer ID) that specifies the
manufacturer whose exclusive message this is. Roland's manufacturer
ID is 41H.ID numbers 7EH and 7FH are defined in an expansion of the
MIDI standard as Universal Non-realtime messages (7EH) and
Universal Realtime Messages (7FH).
dd,..., ee = data:
00H–7FH (0–127)
F7H:
EOX (End Of Exclusive)
3.2 Messages not recorded during recording
Channel Mode messages
Local On/Off (Controller number 122)
status
2nd byte
BnH
7AH
vv=value:
00H,7FH (Local off, Local on)
All Note Off (Controller number 123)
status
2nd byte
BnH
7BH
* When an All Note Off message is received, all notes of the corresponding channel that
are on will be sent Note Off's, and the resulting Note Off messages will be recorded.
3.3 Messages acknowledged for synchronization
System Common messages
Song Position Pointer
status
2nd byte
F2H
mmH
mm,ll=value:
00 00H–7F 7FH (0–16383)
System Realtime messages
Timing Clock
status
F8H
* This message will be received if the Sync Mode parameter is SLAVE.
102
3rd byte
00H
3rd byte
00H
3rd byte
mmH
3rd byte
00H
status
F7H
3rd byte
00H
3rd byte
00H
3rd byte
llH
Start
status
FAH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Continue
status
FBH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Stop
status
FCH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
4. Data transmission (Sequencer section)
4.1 Recorded messages are transmitted during
playback.
4.2 If the Through parameter is ON, messages
received (except for System Common messages
and
System
Realtime
transmitted.
4.3 Messages that are generated and transmitted
4.3.1 Messages automatically generated by the system
Channel Mode messages
Omni Off (Controller number 124)
status
2nd byte
BnH
7CH
* At start-up, this message is transmitted to all channels.
Poly (Controller number 127)
status
2nd byte
BnH
7FH
* At start-up, this message is transmitted to all channels.
4.3.2 Messages generated and transmitted when the
Sync Out is ON
System Common messages
Song Position Pointer
status
2nd byte
F2H
mmH
mm,ll=value: 00 00H–7F 7FH (0–16383)
* This message is transmitted if the Sync out is ON. It is not transmitted when the D-
FIELD is set to VINYL.
System Realtime messages
Timing Clock
status
F8H
* This message is transmitted if the Sync out is ON. It is not transmitted when the D-
FIELD is set to VINYL.
messages)
will
3rd byte
00H
3rd byte
00H
3rd byte
llH
be
Tabla de contenido
