1. TRANSMITTED DATA
NONE.
2.RECOGNIZED
DATA
1) CHANNEL VOICE MESSAGES
STATUS
SECOND
1000 nnnn
0kkk kkkk
1001 nnnn
0kkk kkkk
1001 nnnn
0kkk kkkk
1010 nnnn
0kkk kkkk
1011 nnnn
0ccc cccc
1100 nnnn
0ppp pppp
NOTE : nnnn = MIDI Channel Number ( 0000 - 1111 )
1 :
Recognized Note numbers are 35-59 at Basic channel on normal mode,
or 95-119 at channel 10 at extention mode.
2 :
Note #12(bank1/pad1)-#35(bank3/pad8) control to change "REVERSE of pad_function(PAD)".
Note #36(bank1/pad1)-#59(bank3/pad8) control to change "EFFECT PAD ENABLE(PAD)".
Note #108(source pad) control to change "EFFECT PAD ENABLE(SOURCE)".
Pressure value(0) is turning off,pressure value(not 0) is turning on.
Note #60(bank1/pad1)-#83(bank3/pad8) control to change "LEVEL of pad_function(PAD)".
Note #84(bank1-pad1)-#107(bank3/pad8) control to change "PANNING of pad_function(PAD)".
Note #109(source pad) control to change "LEVEL of pad_function(SOURCE)".
Pressure value(0 to 99) is value of the control.
If pressure value is greater than 99, internal pressure value is limited to 99.
Note #110(source pad) control to change "PANNING of pad_function(SOURCE)".
Pressure value(0 to 100) is value of the control.
If pressure value is greater than 100, internal pressure value is limited to 100.
3 :
Control #12 can be used to Effect Parameter 1(control value 0..100).
Control #13 can be used to Effect Parameter 2(control value 0..100).
If control value is greater than 100, internal control value is Limited to 100.
Control #14 can be used to Effect BPM 40bpm(control value 0)..167bpm(control value 127).
Control #15 can be used to Effect BPM 168bpm(control value 0)..250bpm(control valeu 82).
Control #80 can be used to EFFECT OFF(control value 0)/ON(control value 127).
Control #81 can be used to EFFECT SYNC OFF(control value 0) / ON(control value 127).
MIDI Implementation
THIRD
DESCRIPTION
0vvv vvvv
NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note Off Velocity ( ignored ).
0000 0000
NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
0vvv vvvv
NOTE ON
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note On Velocity ( not 0 ).
0vvv vvvv
POLYPHONIC KEY PRESSURE
kkk kkkk : Note number
vvv vvvv : Pressure value ( See NOTE 2 ).
0vvv vvvv
CONTROL CHANGE
ccc cccc : Control number ( See NOTE 3 ).
vvv vvvv : Control value.
---- ----
PROGRAM CHANGE
ppp pppp : Program cahnge number( See NOTE 4 ).
( See NOTE 2 ).
177
Capítulos
