Yamaha 40 Manual De Instalación página 112

1
a
c
2 1
3
b
2
a
103
7. Fasten:
• Plastic tie 1
NOTE:
Route the wiring harness a by winding them
under and over the shift cable b and the throt-
tle cable c.
8. Install:
• Shift cable 1
• Throttle cable 2
• Cable clamp 3
• Bolt 4
• Hose locating plate 5
• Bolt 6
• Fitting plate 7
• Bolts 8
Bolt:
8.0 N • m (0.82 kgf • m, 5.9 ft • lb)
9. Install:
• Corrugated tube 1 (65 mm (2.6 in))
• Plastic ties 2
• Plastic tie 3
WARNING
Be sure to route and securely install the
fuel hose into the hose guide a. Check that
the fuel hose does not interfere with the
steering friction.
NOTE:
• Route the fuel hose, battery cable, wiring
harness, variable trolling RPM switch lead,
and warning indicator lead through the corru-
gated tube 1.
• Install the corrugated tube 1 near the grom-
met.
E