SEVERIN 4182 Instrucciones De Uso página 12

∙ Do not allow the appliance or its power
cord to touch hot surfaces or to come into
contact with any heat sources.
∙ To prevent the danger of hot water or
steam being emitted, always switch off
the coffee maker and allow suffi cient
time for the appliance to cool down
before it is opened or any accessories or
attachments are removed.
∙ Always switch off the appliance after use.
∙ Remove the plug from the wall socket
- in case of any malfunction,
- during cleaning,
- if the appliance is not being used for an
extended period of time.
Each time the appliance is reconnected to
the mains power, the internal clock must
be re-set.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ Do not allow the power cord to hang free;
the cord must be kept well away from hot
parts of the appliance.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Setting the time
Insert the plug into a suitable wall outlet.
None of the indicator lights will come on. The
coffee maker is switched off, the LCD display
showing 0:00.
The internal clock uses a 24-hour display
format. The current time is set by using
the 'h' button for the hours, while the 'min'
button is used to set the minutes.
Example:
The current time is 15.30 (3 pm).
∙ Press the 'h' button repeatedly (or keep it
12
pressed for the necessary length of time)
until the LCD display shows 15:00.
∙ Press the 'min' button (or keep it pressed)
until the LCD display shows 15:30.
Timer
To start the brewing process with a delayed
timer setting, the timer must be set to the
desired time.
∙ Press the button 'PROG' and keep it
pressed. The LCD display shows- BREW
and the time last entered, or 0:00.
∙ While the PROG button is pressed, the
desired time can be set using the buttons
'h' und 'min'.
∙ Afterwards, press the On/Off button once.
The red indicator light AUTO comes on
and the LCD display shows AUTO. At the
pre-programmed time, the coffee maker
will automatically switch on.
On/Off button
The On/Off button is used to switch between
the three settings Off-AUTO-On:
Off - The appliance is switched off.
No indicator light is on.
AUTO - The appliance automatically
switches on at the pre-
programmed time. The red
AUTO indicator light comes on and
the LCD display shows AUTO.
On - The appliance is switched on. The
green indicator light comes on.
Aroma function
∙ To obtain a stronger coffee fl avour, the
appliance is equipped with a special
aroma function. With this setting, the
hot water is released at intervals. This is
especially useful when preparing smaller
quantities of coffee.