Designated Use; Responsibilities Of The User; Personal Protective Equipment (Ppe) - Abicor Binzel CAT3 Instructivo De Servicio

2 Safety
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose described in
these instructions in the manner described. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.

2.2 Responsibilities of the user

• Keep the operating instructions within easy reach at the device for reference and enclose
the operating instructions when handing over the product.
• Putting into operation, operating and maintenance work may only be carried out by
qualified personnel. Qualified personnel are persons who, based on their special training,
knowledge, experience and due to their knowledge of the relevant standards, are able to
assess the tasks assigned to them and identify possible dangers
(in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in question.
• Ensure good lighting of the work area and keep the work area clean.
• According to DIN EN 60974-10, this device is considered class A welding equipment.
Class A welding equipment is not intended for use in residential areas with a public low-
voltage power supply system. Such use can cause electromagnetic interferences that may
result in equipment damage and malfunctions. Only use the device in industrial areas.
• Occupational health and safety regulations of the country in question. For example,
Germany: Protection Law and the Company Safety Ordinance.
• Regulations on occupational safety and accident prevention

2.3 Personal protective equipment (PPE)

To avoid dangers for the user, wearing personal protective equipment (PPE) is recommended in
these instructions.
• It consists of protective clothing, safety goggles, class P3 respiratory mask, safety gloves
and safety shoes.
EN - 6
CAT3
BAL.0324.0 • 2018-06-13