Idiomas disponibles
Idiomas disponibles
OPERATION
MAKING GARDEN PAVER CUTS
See Figures 28 - 31.
Garden pavers require special cuts to make curves and
corners in walls, patios, and other landscaping features.
To cut paver shorter:
Measure paver to determine how much material needs
to be removed.
Using a marker or grease pencil, make two marks, marking
all the way around the paver.
Place the material on the table and firmly against the
fence.
NOTE: It may be necessary to remove side splash guard
to make room for paver cut.
Make sure the material is clear of the cutting wheel before
turning on the saw.
Turn the on/off switch to the on position.
Let the cutting wheel build up to full speed and wait for
the wheel to get wet before moving the material into the
wheel.
Hold the material firmly against the miter guide and fence
and feed the material into the cutting wheel.
When the cut is made, turn the saw off. Wait for the cutting
wheel to come to a complete stop before removing any
part of the material.
Move the sliding table away from the motor head and
turn paver over to make through cut.
Fig. 28
23 — English
NON- THROUGH
CUT
Fig. 29
THROUGH CUT
Fig. 30
