Idiomas disponibles
Idiomas disponibles
EN
WARNING
The power tool will produce electromagnetic fields when in use. This magnetic field may damage the function of
medical implants under certain circumstances. In order to avoid serious injury, we recommend that the user with implant(s)
consults a doctor and the producer(s) of the implant(s) before using this tool.
2. product overview
Intended purpose
The tool is designed for tying the vines or branches. If this tool is used for other unapproved purposes, it may cause damage
to the tool and cause harm to the user. This tool can only be used by adults. Or can be used by minors over 16 years of age
under the supervision of adults. Do not use the tool in the rain or on wet hedges.
The operator or the user shall assume full responsibility for the harm to others or any property damage to others caused by any
accident occurs during the use. The manufacturer shall not be liable for any damage caused by non normal or improper use.
1. Function description
The tying machine is featured by compact structure, light weight, fast speed, and easy one-handed operation. The product
cobines the characteristics together such as safety, high efficiency, and simple operation. At the time of usage, buckle the tying
mouth on the front end of the tying machine on the vines or branches needing to be tied, pull the trigger, the machine would
finish tying action within 0.3s. After confirming the completion of tying action, hold and lift up the machine, then carry out the next
tying task. The tying machine has Gear 1-4 regulating switches to adjust the turning number of tying wire. Gear 1-3 turns, Gear
2-4 turns, Gear 3-5 turns, Gear 4-6 turns. Users can adjust to a suitable gear according to the thickness of the branches to be
tied, so as to achieve the best effect of branch tying.
2. Operating instructions
1.Switch on power, the tying machine is in working state, start working after pulling trigger. In case of after long-term usage, if
the tying machine stops working please check LED indicator, if it is red, at this moment, it is under-voltage protection, indicating
that has been used up, please charge as soon as possible.
2.To save battery and ensure that the tying machine has the longest service life, don't overload the machine,don't use it to tie
branches exceeding 25mm.
3.If the tying is not done correctly, turn off the power to check the machine. Remove the tying wire that cannot be tied properly
from the front by tying the mouth with your hand, then turn on the power. Perform idle operation once to see if it can be tied
successfully. If the binding becomes normal, continue working. If the tying is unsuccessful several times, please turn off the
power for inspection. Open the front cover and pressure plate, check the cable at the entrance and the entire power path for any
accumulated and stuck phenomena, and clean up in time in case of any abnormalities. In the process of tying, if the tying stops
on half way,the feeding hook cannot retract and the tying machine is stuck on branches and cannot be lifted up, please switch
the power off ,then lift up feeding hook with hand, and take off the tying machine.
9
