Idiomas disponibles
Idiomas disponibles
EN
General safety rules for power tools
WARNING
Read all safety directions and all instructions. Failure to follow all safety directions and instructions listed
below may result in electric shock and fire and/or serious injury. Keep all safety directions and instructions for future
reference. The term "Power Tool" used in all the following safety instructions refers to mains-operated power tool (corded) and
battery-operated power tools(cordless).
1. Work area safety
1) Keep work area clean and well lit. Cluttered or dark areas may invite accidents.
2) Do not operate power tools in explosive or flammable atmosphere, such as in the presence of flammable liquids, gases or dust.
The spark generated by the power tool may ignite dust or gas.
3) Keep children and bystanders away while operating the power tool. Distraction may cause you to lose control of the tool.
2.Electrical safety
1) Power tool plug shall match the socket. Never modify the plug in anyway. Do not use any plug adapter with earthed (grounded)
power tools. Unmodified plugs and matching sockets will reduce the risk of electrical shock.
2) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
3) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords will increase the risk of electric shock.
5) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
will reduce the risk of electric shock.
6) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an
RCD will reduce the risk of electric shock.
3.Personal safety
1) Keep alert, watch what you are doing and use common sense while shifting the power tool. Do not operate the power tool when
you are tired, or under the influence of drugs, alcohol or medication. A moment of inattention when operating the power tool may
cause serious personal injury.
2) Use personal protective equipment. Always wear goggles. Safety equipment, such as dust mask, anti-skid safety shoes, hard
hat, hearing protection and other devices used for appropriate conditions will reduce personal injury.
3) Avoid accidental start. Make sure that the switch is in the OFF position when connecting the power supply and/or the battery
pack, taking up or moving the tool. Carrying power tool with your finger on the switch or plugging in power tool that have the
switch ON, may cause danger.
4) Remove all adjustment keys or wrenches before the power tool is switched on. A wrench or key left attached to a rotating part
of the power tool may cause personal injury.
5) Do not overreach. Keep proper footing and balance at all time. This enables better control of the power tool in unexpected
situations.
6) Dress properly. Do not wear loose clothing or wear jewelry. Keep clothes, gloves and hair away from moving parts, because of
loose clothing, jewellery or long hair may be caught in moving parts.
5
