Idiomas disponibles
Idiomas disponibles
How to run a self-cleaning cycle
1. Make sure the oven door is closed completely and unlocked. Turn off all oven
and cooktop functions.
2. Select Self Clean using drag slider. Then, select the cleaning time. (2 hour /
3 hour / 5 hour)
3. Tap OK or long tap Start.
The oven door is locked automatically and the oven begins to heat up.
NOTE
• You will not be able to start a self-cleaning cycle if the oven lock feature is
activated or if the oven's temperature is too hot.
• The oven door locks automatically. The display will show the cleaning time
remaining. It is not be possible to open the oven door until the temperature
drops to a safe/cool temperature.
4. When the self-cleaning cycle is done, End will appear in the display and the
range will beep several times.
How to delay the start of self-cleaning
1. Tap and hold
, and then select Delay Start using drag slider.
2. Select Self Clean mode using drag slider.
3. Set the time you want the oven to start self-cleaning using drag slider.
4. Tap OK or long tap Start.
The oven will start self-cleaning at your specified time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1. Tap Stop.
2. You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth after
the oven cools. (If white spots remain, remove them with a soap-filled steel
wool pad and rinse thoroughly with a vinegar and water mixture.)
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
English 57
