Loading Cutlery And Dishes - Zanussi ZSF2430 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5
Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning agent,
liquid detergent). There is a risk of damage to the
appliance.

Loading cutlery and dishes

Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb
water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and pans)
with the opening down.
– Make sure that water does not collect in the contain-
er or in a deep base.
– Make sure that cutlery and dishes do not lie inside
one another.
– Make sure that cutlery and dishes do not cover oth-
er cutlery and dishes.
– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water droplets.
• Plastic items do not dry as well as porcelain and steel
items.
• Put light items in the main basket. Make sure that the
items do not move.
Caution! Make sure that the spray arm can move
freely before you start a washing programme.
Fill when the rinse aid indi-
cator (B) becomes clear.
B
Adjusting the dosage of rinse aid
Primary basket
1
Arrange items on and below the cup
racks. For longer items fold the cup
racks up.
Cutlery basket
Warning! Do not put long-bladed knives in a verti-
cal position to prevent injury.
Arrange long and/or sharp items of cutlery horizontally in
the primary basket. Be careful with sharp items such as
knives.
The rinse aid dial is set at
the factory at position 1.
To increase or decrease
the dosage refer to 'What
to do if...'
Arrange the
deep dishes and
large lids
around the edge
of the basket.
Arrange the
items to let wa-
ter touch all
surfaces.
7

Capítulos

Tabla de contenido
loading

Tabla de contenido