Control Panel - Zanussi ZSF2430 Manual De Instrucciones

• A qualified and competent person must do the electri-
cal installation.
• A qualified and competent person must do the plumb-
ing installation.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,

Control panel

1 Programme knob
2 Start/cancel button /(Cancel)
3 Delay start button
4 Indicator lights
5 On/off indicator light
Comes on when the washing phase or the rinsing phase operates.
Comes on when the drying phase operates.
Comes on when the washing programme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for some hours. This does not have
1)
an unwanted effect on the operation of the appliance.
1) When the salt container is empty, the related indicator light does not come on while a washing programme operates.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval of 3 hours. Refer to the chap-
ter 'Setting and starting a washing programme'.
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of the
appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
Programme knob and on/off indicator light
• To set a washing programme, turn the programme
knob clockwise or anticlockwise. The programme
5 4
1 2 3
3