WMF Ambient Instrucciones De Uso página 13

Warning: risk of burns: The heated glass plate will be hot. Do not move the plate when hot.
Note: Make sure as much food as possible is in contact with the plate to maximise the warming effect.
The lower temperature settings (50°C and 70°C) are ideal for keeping foodstuffs like pizza and slices of
quiche warm on the glass plate. If the food is placed on a plate or other container then on the glass
plate, the container will absorb a lot of the heat. You will therefore need to select a higher tempera-
ture (90°C or 110°C) in order to keep the food warm effectively.'
▪ To turn off the hotplate function after use, press the "-" symbol until the right-hand LED on the
glass plate lights up white, then leave the appliance to cool completely.
Note: In addition to the white LED , the left-hand LED will fl ash red until the glass plate has cooled
completely. The light indicates that the appliance could cause burns if touched. Do not begin
cleaning until the LED has stopped fl ashing red (see section on Cleaning and care).
▪ Note: For reasons of hygiene, do not keep warm your dished longer as needed.
Cooling function
▪ The WMF Ambient Cooling & warming plate includes a cooling element. In order to provide maxi-
mum cooling capacity the cooling element must be chilled for at least four hours in the freezer at
-18°C before being placed in the appliance.
▪ Warning: Risk of frostbite from direct and prolonged skin contact with cooling element.
Warning: risk of burns: If the warming function has been used earlier, allow the appliance to cool
completely before touching the glass plate and remove using the eject button. The glass plate must
be cool to the touch before the cooling element can be placed on the glass plate.
▪ Carefully place the cooling element on the glass plate, then fi t the glass plate onto the appliance –
you will hear it click into place.
1.
▪ The cooling element is held down so as to maximise contact with the glass plate. Depending on the
air temperature, the cooling feature can be used for up to two hours.
▪ Plug the appliance in and press the on/off switch. The right-hand LED on the glass plate will light
up blue to show that the cooling function is active.
▪ The blue LED light will turn off when the cooling function is no longer fully effective. The same
LED will light up white to indicate that the appliance is in standby mode.
▪ Turn the appliance off using the on/off switch after use. Turn off before cleaning (see section on
Cleaning and care).
Note: The air temperature may cause condensation to form on the glass and hotplate. After
removing the cooling element, use a tea towel to wipe any condensation off the hotplate.
2.
13