Idiomas disponibles
Idiomas disponibles
Twilight setting
The brightness response threshold (twilight) can be
infinitely varied from approx. 2 – 2,000 lux.
Daylight mode must be selected when adjusting
the detection zone and performing the functional
test in daylight..
Basic light level
The brightness of the basic light level setting can
be varied between 0% and 100%.
Basic light can be set in relation to time or ambient
light level. The light switches to maximum output
(100%) for the time selected in response to
movement in the detection zone. The light then
returns to the basic light level.
Main light level
The brightness of the main light level setting can be
varied between 0 % and 100 %.
Soft light start function
On switching ON, light level constantly builds up to
100 % (fade in).
On switching OFF, light level is constantly reduced
to 0 % (fade out).
Fade-in and fade-out times are selectable.
Manual override
The manual override parameters can be set via the
STEINEL Connect App. In the new app, manual
override can be set to any specific time of day
(teaching time of day).
Bluetooth interconnection (Bluetooth Connect
mesh)
The sensor switch complies with the Bluetooth
Mesh standard. It can be interconnected with
all products complying with the Bluetooth mesh
standard.
The sensor switch is configured via the STEINEL
Connect App. Appropriate network keys are
saved on a smartphone or tablet the first time a
connection is made between the sensor switch
and STEINEL Connect App. The key rules out any
unauthorised access to the sensor. The network
key must be shared for access via another smart-
phone or tablet.
Note:
After the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting
movement again. The LED floodlight will only
switch ON in response to movement once this
period has elapsed.
The XLED home 2 SC has an internal clock for
time-based activation and deactivation. This auto-
matically synchronises with the clock of the con-
nected smartphone via the STEINEL Connect App
each time a Bluetooth connection is established.
To ensure correct function following an interruption
in the LED floodlight's power supply, it must be
re-connected via the STEINEL Connect App.
The internal clock is re-synchronised with the
smartphone clock.
7. Operation / maintenance
The LED floodlight is not suitable for burglar alarm
systems as it is not tamperproof in the manner pre-
scribed for such systems. Weather conditions may
affect the way the LED floodlight works. Strong
gusts of wind, snow, rain and hail may cause the
light to come ON when it is not wanted because
the sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
Important note: the control gear cannot be
replaced.
8. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
tally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.
– 22 –
