Idiomas disponibles
Idiomas disponibles
d/or has not been installed
connected or installed cor-
d.
n selected.
ea or is too far from the party
ive and/or there are obsta-
hannel
se to equipment that causes
s, etc.)
BR01 instruction guide
Solution
Verify that the battery pack is charged and that it has been cor-
rectly installed.
Recharge the battery pack.
Inspect the connections of the battery-charger and the installa-
tion of the batteries.
Move to an another area.
Adjust the volume level.
Check that the CTCSS tone or DCS code corresponds to the
one set by the parties you are communicating with.
Select the same radio channel used by the parties you are com-
municating with.
Move to another area.
Check that the CTCSS tone or DCS code corresponds to the
one set by the parties you are communicating with.
Try temporarily disabling the Squelch by means of the Monitor
feature.
Move closer to the party you are communicating with or to ano-
ther area.
Check the traffic on the radio channel by means of the Monitor
feature and select another channel if required.
Increase the distance between the radio and this equipment.
Try reducing the transmission time and/or using a low power.
| 11
