TESY CN03 YYZ MIS F Instrucciones Para El Uso Y Mantenimiento página 3

IMPORTANT SAFETY MEASURES AND INSTRUCTIONS:
WARNING!
•
Please read this manual before operating the appliance and keep it at a safe
place for future reference. In case the appliance is obtained by a new owner,
it should be transferred together with its manual.
•
CAUTION: Children under 3 years of age should be kept away from the
appliance unless they are under constant supervision.
•
Children from 3 to 8 years of age are allowed to operate the on/off button
ONLY, provided that the appliance is installed and ready for operation and
such children have been supervised and instructed in safe operation of the
appliance and they understand all related risks.
•
Children from 3 to 8 years of age MUST NOT: connect the plug to power
sockets, make adjustments, clean it or carry out user maintenance perations.
•
This appliance can be used by children older than 8 years of age and by people
with reduced physical, sensor and mental capabilities, as well as by people
with insufficient experience and knowledge provided they are supervised
or instructed in safe operation of the appliance and understand the related
risks. Children should not be allowed to play with the appliance. Cleaning and
user maintenance operations must not be carried out by children without
supervision.
•
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
•
CAUTION: Some of the appliance parts may get very hot during operation
and thus cause burns to users. In case there are children and vulnerable
people in the room, special attention should be paid.
•
WARNING: Do not cover the appliance in order to
prevent overheating!
•
The appliance must not be placed right under a socket box!
•
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard.
•
Before connecting the appliance to the mains, check if the voltage indicated
on its technical plate corresponds to the voltage of the electricity, supplied
to your house.
•
This appliance shall be used only for the purpose it has been designed and
intended for, i.e. heating of domestic premises. The appliance is not intended
for commercial/industrial application. Every other use is to be considered
improper, and therefore dangerous. The manufacturer doesn't bear
responsibility for damages arising from improper and irrational use. Non-
adherence to these instructions would render the warranty invalid!
•
Do not leave your home while the portable electric convector heater is
operating: make sure that the power switch is in OFF position (Portable
electric convector heaters with mechanical control).
•
Keep inflammable objects, such as furniture, pillows, bedding, paper, clothes,
curtains etc. at a safe distance of at least 100 cm away from the convector .
•
Do not operate the appliance in areas of use or storage of combustible
substances. Do not operate the appliance in areas of combustible media (for
example in close proximity to inflammable gases or aerosols) – there is great
risk of explosion and fire!
•
Do not insert and do not allow foreign objects to enter the ventilation
openings (inlet and outlet) because this will cause electric shock, fire or will
damage the appliance.
•
The appliance is not suitable for animal breeding. The portable electric
convector heater is intended for domestic/indoor operation only.
•
When positioning the appliance, do not cover the safety grilles; do not
hamper the incoming and outgoing air flow. All objects must be at a safe
distance of at least 1 meter away from the appliance front and sides.
•
The most common reason for overheating is dust and fluff deposits in the
appliance. Clean the ventilation openings on a regular basis with a vacuum
cleaner, but before that it is very important to disconnect the portable electric
convector heater from the mains.
•
Never touch the appliance with wet or moist hands – there is risk for your life!
•
The power socket should be accessible all the time in order to disconnect the
power plug when needed as fast as possible! Never pull the power cord or the
appliance itself in order to disconnect it from the mains.
•
PAY ATTENTION! Outgoing air gets heated during appliance operation (up
to more than 100°С).
•
If you decide to stop using an appliance of this kind, it is recommended to
make it unusable by cutting its power cord after you have disconnected it
English
from the mains. It is advisable all possible risks related to the appliance to
be secured, especially in relation to children that may play with out-of-use
appliances.
•
WARNING: Do not use this appliance with a programmer, counter or any
other mechanism which could automatically turn on the portable electric
convector heater – if the appliance is covered or positioned incorrectly there
is a risk of fire.
•
Position the power cord in such a way that it does not obstruct the free
movement of people and cannot be stepped on! Use only approved extension
cords, which are suitable for this appliance, i.e. they have a compliance sign!
•
Never move the appliance by pulling its power cord; do not use the power
cord for carrying other objects!
•
Do not bend the power cord and do not pull it against sharp edges; do not
place the power cord on hot surfaces or open fire!
•
WARNING: To reduce the risk of fire, keep textiles, curtains, or any other
flammable material a minimum distance of 1m from the air outlet.
•
Do not use this portable electric convector heater in the immediate
surroundings of a bath, a shower or a swimming pool.
•
Do not use this portable electric convector heater if it has been dropped.
•
Do not use if there are visible signs of damage to the portable electric
convector heater.
•
Use this portable electric convector heater on a horizontal and stable surface,
or fix it to the wall, as applicable.
•
WARNING: Do not use the portable electric convector heater in small rooms,
when they are occupied by persons not capable of leaving the room in their
own, unless constant supervision is provided.
TECHNICAL PARAMETERS - SEE ANNEX I
PACKING
•
After unpacking the appliance, check if its contents are intact and if it has
not been damaged during transportation! In case a damage or incomplete
delivery is found, contact your authorized retailer!
•
Do not dispose of the original packing box! It could be used for storage and
transportation purposes in order to avoid damages during transportation!
•
Disposal of packing material should be done in the appropriate way! Children
must be prevented from playing with polyethylene bags!
OPERATION AND INSTALLATION OF FEET SET
•
This portable electric convector heater is designed to be used indoors.
Dimensions of heated volume and heated area of a room / appliance
models (fig.1)
Model Heated volume
CN 03 050 MIS F - 500W 10* - 15 m
CN 03 100 MIS F - 1000W 20* - 30 m
CN 03 150 MIS F - 1500W
30* - 45 m
CN 03 200 MIS F - 2000W 40* - 60 m
CN 03 250 MIS F - 2500W 50* - 70 m
CN 03 300 MIS F - 3000W 60* - 80 m
* Minimum guaranteed heated volume (area) for heating at an average capacity of heat
transmission factor λ=0.5 W/(m2K) for a heated room. Higher values of heated volume
(area) can be achieved at an average value of λ=0.35 W/ (m2K). Standard height of
heated rooms – 2.5 meters.
In accordance with Regulation EU 2015/1188 implementing Directive 2009/125/
EC this electric heating appliance is not intended for wall installation!
Important: In premises bigger than 45 m3, it is recommended to use a
combination of 2 or more portable electric convector heaters.
•
Do not position the portable electric convector heater under a power socket or
electricity connection box.
•
DO NOT install/operate the portable electric convector heater:
1. in places where a draught is present, which could influence the control
settings;
2. right under a power socket;
3. in "Volume 1" for bathrooms;
4. in "Volume 2" if the control board can be reached by a person who is in a
shower or in a bathtub;
•
Before starting the set installation check if the portable electric convector
heater is disconnected from the power socket!
•
The feet are to be installed at the air inlets – it is correct them to be installed at
the two sides ends of the portable electric convector heater in a symmetrical
manner – at the same distance from the sides ends of the portable electric
convector heater. For installation purposes – all portable electric convector
heaters have got two 2x2 openings. (fig. 2a)
•
Mount the first foot – by inserting first the higher part of the foot into the
portable electric convector heater (you should stand opposite of the face of
the portable electric convector heater) – the part is lower than the front metal
panel. Then you should take a Phillips screw-driver (not included in the product
set) and screw in the two 3.5x9,5mm securing screws. The screw goes through
the plastic foot and gets screwed into place in the metal body of the portable
electric convector heater. You should repeat the same operation for the second
Heated area
4* - 6 m
3 2
3 8* - 12 m 2
3 12* - 18 m 2
16* - 24 m
3 2
3 20* - 28 m 2
3 24* - 32 m 2
Operation and Storage Manual of Convector Heater
EN
3