Idiomas disponibles
Idiomas disponibles
4.1.3. It also can start Pot 1 firstly by press "Pause and start buttons key"
after set parameter of Pot
of Pot 2, after Pot 2 ready, press "Pause and start
buttons key" to start Pot 2;
4.1.4. During the double pots working process, pressing the Temp or
Time Key icon once, the recipe of temperature will be displayed
alternately in left & right display screen, 3 seconds after no opera
tion will switch to time display;
Debug during the double pots working process
4.2.
4.2.1. During the cooking process of 2 pots are working at the same time,
if you need to debug the temp or time for Pot 1, press
debug the temp and time as you need, the recipe can't be debug in
this state.
If no operation within 10 seconds after debugging, the display
screen automatically returns to normal;
4.2.2. If you need to debug the temperature or time of
4.2.1;
4.2.3. During the cooking process, recipe and temp/time can be adjusted
by pressing
then Pot 1or Pot 2 will enter the pause mode, press
"Pause and start buttons of key" will resume cooking
after debugging;
4.2.4. After the machine enter the pause mode, if there is no operation
after 5 minutes, the suspended Pot will enter the standby mode.
4.3. Close pot
4.3.1. Press the
"power key" for 2 seconds, the selected pot will stop working and
return to standby mode.
4.4. Draw out of the basket
4.4.1. During cooking process, if one basket was drawn out, the display
will show the "OPEN" at any time. the corresponding side will stops
working (both heating and motor will be stopped), and it will
resume working as per previous setting when the basket is insert
ed back. One frying basket is removed and loaded without affect
ing the work of the other pot;
4.4.2. When the frying basket is drawn out in standby state, the display
will show the "OPEN". At this time, the corresponding pot cannot be
operated.
4.5. Pause the 2 pots
4.5.1. When double-pot cooking, press "Pause and start buttons of key"
once, and the 2 pots enter the pause mode at the same time, and
the two screens and recipes are flashing. Press the "Pause
and start buttons of key" again, and the 2 pots resumes working
mode;
/
and "Pause and start buttons of key" in turn,
or pot
key or
pot first, and then press and hold the
and then press
to set parameter
and then
pot, refer to
www.NutriChefKitchen.com
13
