Hilti SL 4-22 Manual De Instrucciones Original página 7

Idiomas disponibles

Idiomas disponibles

▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶ Persons with reduced physical, sensory or mental abilities or lack of experience and knowledge are not
permitted to use this product.
▶ Children must receive instruction and be supervised to ensure that they do not play with the product.
▶ Do not use the product where there is a risk of fire or explosion.
▶ The product is suitable for working in a damp environment. To avoid the risk of electric shock, do not
immerse product in water or any other liquid.
▶ Do not look directly into the light source of the product and do not aim the beam at other persons' faces.
Risk of dazzling or eye injury!
▶ A falling product can constitute a risk of injury for you and others. Secure the area in which you will be
working.
▶ Do not touch hot parts on the product. Risk of burn injuries!
▶ Do not use the magnetic holder for horizontal overhead mounting.
▶ Before each use, check the magnetic holder to ensure that it is in perfect condition. Whenever you use
the magnetic holder, make sure that the product is securely attached. Make sure that the product cannot
shake or slip. Failure to follow these instructions can result in personal injury.
▶ When the product is not in use, keep it where it cannot drop or be pulled into a bathtub or washbasin.
▶ Use only accessories specifically intended and recommended for this product by the manufacturer. The
fact that an accessory can be attached to the product does not necessarily mean that it can be used
safely.
▶ The light source of this luminaire is not replaceable; when the light source reaches its end of life the
whole luminaire must be replaced.
▶ The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than
0.7 m is not expected.
2.2
Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
8
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
*2412887*
2412887
English
3
loading