Idiomas disponibles
Idiomas disponibles
Storage
Q
Switch the product off and remove the battery
o
pack
.
14
Clean the product as described
o
(see "Cleaning").
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
o
inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
Attach the blade cover
o
We recommend using the original package
o
for storage or covering the product with a
suitable cloth or enclosure to protect it against
dust.
Regularly check the charge level of the
o
battery pack, if it is to be stored for an
extended period. Optimum storage conditions
are cool and dry.
Transportation
Q
Switch the product off and remove the battery
o
pack
14
.
Attach the blade cover
o
Attach transportation guards, if applicable.
o
Always carry the product by its handles.
o
Protect the product from any heavy impact
o
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
o
or falling over.
Troubleshooting
Q
WARNING!
Only perform the steps described within
u
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre or
a similarly qualified specialist if you cannot
solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
32 GB / IE
.
13
.
13
Problem
Possible cause
Product
Battery pack
does not
not properly
start
attached
Battery pack
discharged
Battery pack
damaged
Other electrical
defect to the
product
Product
Battery pack
does not
capacity too low
reach full
power
Air vents are
blocked
Unsatisfac-
Accessory is worn Replace with a
tory result
Accessory not
suitable for
intended operation
Product sud-
Product
denly stops
overloaded
Battery pack
discharged
Battery pack
too hot
Excessive
Accessory is
vibration or
dull / damaged
noise
Bolts / nuts are
loose
Solution
Attach properly
14
Remove and
14
charge the
battery pack
14
Check by
14
a specialist
electrician
Check by
a specialist
electrician
Remove and
14
charge the
battery pack
14
Clean the air
vents
new one
Use suitable
accessory
Remove the
product from the
working surface
and switch it on
again
Remove and
14
charge the
battery pack
14
Remove the
14
battery pack
14
and let it cool
down
Replace with a
new one
Tighten bolts /
nuts
