Operation; Cleaning And Care - Unold 78316 Manual De Instrucciones

Ocultar thumbs Ver también para 78316:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
16. Make sure that the power cord does not hang
over the edge of the countertop or table,
since this can cause accidents, for example
if small children pull on the cord.
17. Do not operate or store the ice crusher out-
doors.
18. Do not use the appliance with accessories of
other manufacturers or brands.
19. After use and before cleaning the appliance,
turn it off by means of the ON/OFF switch
and unplug it from the power supply. Never
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

oPEration

Use only for crushing pieces of ice! Do not use for chopping food.
Do not use ice cubes made of fruit juice, since they contain fruit acid. Fruit acid gums up the grinder
and can damage the appliance.
1. Clean all parts before using for the first
time.
2. Connect the appliance via the power cord to
the power supply (AC, 230 V~, 50 Hz).
3. Turn on the appliance by means of the
On/Off switch (set switch to I position).
Important: First turn on the ice crusher, then
add the ice cubes.
4. Remove the transparent lid that closes the
filling shaft.
5. Put ice cubes into the filling shaft. If the
filling flap does not automatically open
from the weight of the ice cubes, you can
carefully press the flap downward until the
ice cubes fall into the filling shaft.

clEaning anD carE

1. Before cleaning, always turn off the appliance
and unplug it from the power supply.
2. Do not immerse the appliance and power
cord in water or other liquids.
3. Wipe off the ice crusher with a damp cloth.
You can clean the ice container and the lid
with warm dishwater; however, they are not
dishwasher-safe. Do not use any abrasive
scouring agents, steel wool, metal objects,
hot cleaning agents or disinfectants.
4. If the grinder needs to be cleaned, you can
use a conventional bottle brush.
5. Moisten the bottle brush with warm
dishwater, press the safety flap of the ice
crusher downward and carefully move the
leave the appliance unattended when it is
plugged in to the power supply.
20. Clean the appliance after every use (see
chapter on Cleaning and Care).
to prevent injuries, never insert
fingers, hands or other objects into the
filling shaft.
do not hold your head over the
filling shaft while the appliance is in
operation.
caution: Do not overfill! The safety
flap has to close automatically!
6. The transparent ice container catches the
crushed ice.
7. If you wish to crush a larger amount of
ice, turn the appliance off (set switch to
0 position), remove and empty the ice
container, then replace it and continue with
step no. 3.
8. To protect the motor from overheating, the
appliance must be switched off for about
30 minutes after 4 minutes of operation.
brush back and forth in the filling shaft.
Afterwards, rinse the bottle brush with clear
water and repeat the above step.
Please exercise caution so that you
are not injured by the grinder!
6. The appliance and power plug must be
completely dry before the appliance can be
operated again.
7. When completely dry, store the ice crusher
in a dry, safe place so that it is protected
from dust, shocks, heat and moisture.
11
Tabla de contenido
loading

Tabla de contenido