Technical Data; Types Of Power Supply - Comunello LIWIN L30 Serie Manual De Instrucciones

3. TECHNICAL DATA

3.1 Table of technical data and mark
The CE mark certifies that the actuator conforms to the essential health and safety requirements laid down by
European product directives. The CE mark can be identified by the relevant adhesive label applied to the outside of
the product, on which are shown some of the data shown in the following table:
Model
Power supply V~
Frequency
Operation
Push/Pull strength L30
Stroke speed unloaded
Protection class
Double insulation
Motor voltage
Power
Operating temperature
Strokes
Closed limit switch
Soft Start/Soft Stop
Rilevamento ostacoli
Collegamento in parallelo
Sincronizzazione
Dimensioni
* Replace "y" with the colour code: 0B black, 0W white, 0G grey.
4. ACTUATOR

4.1 Types of power supply

The Liwin L30 series of actuators is available in various models and colours in two electrical supply versions:
• 230 Vac - can be supplied with mains power 230 Vac (50 Hz) (with a tolerance of ±10%), with a three-core supply
cable: BLUE, neutral common; BLACK, open phase; BROWN, closed phase.
• 24 Vdc - can be supplied with a voltage of 24 Vdc with a two-core supply cable: BLUE, connected to the + (positive)
closed; BROWN, connected to the + (positive) open.
22
L30 230V
ML30S136H0y00*
230V
50Hz
S2 4 min
300 N
18 mm/s
IP30
yes
0,19 A
28 W
-5°C - +50°C
200 – 250 – 300- 360 mm
on impact
yes / yes
yes
yes ( max 30 actuators )
no
390x34x56 mm
L30 24V
ML30S136L0y00*
24V
50Hz
S2 4 min
300 N
18 mm/s
IP30
low voltage
1 A
28 W
-5°C - +50°C
200 – 250 – 300- 360 mm
on impact
yes / yes
yes
yes ( max 30 actuators )
no
390x34x56 mm