Idiomas disponibles
Idiomas disponibles
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF APPLIANCE WORKS
INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT: During the first few minutes of initial use, you may notice a slight odor. This is normal and will quickly
disappear.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes
No Tools Required for Assembly.
ASSEMBLY INSTRUCTIONS
1. Make sure that the fan is on a firm, level surface.
2. Install feet before operating the fan.
Insert the front part of the feet first (A) and then push back until it
snaps into place (B).
OPERATING INSTRUCTIONS
Controlling the Fan Speed
Once fan is fully assembled (see Assembly Instructions section), place fan on a dry, level surface. Plug it into a 120V AC
electrical outlet. To select the desired fan speed or to turn it off, turn the Speed Control Knob located at the back of the unit.
3 speeds control: 0=Off, 1=Low, 2=Medium, 3=High.
Fan adjustable angle
Tilt the fan body manually up or down. The maximum tilt angle: 130° (Fig. 1).
CARE AND MAINTENANCE
This appliance requires little maintenance and contains no user serviceable parts. Do not try to fix it yourself. Refer it to
qualified service personnel if servicing is needed.
This fan is permanently lubricated and will not require additional lubrication for the life of the fan.
TO CLEAN: Always disconnect the power cord from the electrical outlet when cleaning your fan. Light accumulated dust can
be removed by using a soft cloth to wipe away the dust at the back grille of the fan. Wipe the exterior surfaces of the fan
occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft dry cloth before operating the fan. Do not use
harsh cleaners or materials to clean this unit, doing so will cause damages to it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD CREATE A
FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL
REQUIRE NO FURTHER LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR
RECOMMENDED. IF SERVICE IS REQUIRED, SEND YOUR FAN TO THE AUTHORIZED SERVICE FACILITY.
4
A
Fig. 1
B
