Idiomas disponibles
Idiomas disponibles
4. ELECTRICAL CONNECTION
OFF
Legend
Legende
(L)
(L)
Phase
Phase
( )
( )
Terre
Ground
Neutre (N)
(N)
Neutral
(Brown)
(Yellow/Green)
(Blue)
Take care to ensure that the length of the electrical cable supplied with the motor (200 cm) can reach
i
the mains supply point.
Please pass the electric cables, the antenna and the transmitter inside the plate (cover)
available on your roller shutter, then fix them with screws.
(This plate already exists in the box and is not included in this motor kit).
Caution: Don't forget to turn
off the circuit-breaker before
performing this step, as failure to
comply with the above recom-
mendation may result in risks to
life and limb.
Make the electrical
connection according to the
following diagram.
To make the electrical
connection easier, you can
disconnect the module for
connection to the ENKI box
(
) and reconnect it.
It is important to route the cables
behind the cover to protect them
and avoid any risk of them being
pulled out when the roller shutter
is raised or lowered. Incorrect
fitting of the cable and conse-
quent damage will invalidate the
warranty.
EN
115
