DICTATION COUNT
Letter quantity, length and remaining dictation
time
The end of the letter must be marked during dictation in order to
register on the display.
Insert a recorded steno-cassette that has
into the tape compartment.
If the steno-cassette has not been removed from the
compartment since turning the unit on, press th »EJECT
button and close the compartment manually.
– The counter is reset to zero (0).
Press the »
– The tape rewinds to the beginning.
– The end-of-letter marks that were set during dictation
are counted and stored.
– Index marks are not stored.
– The following appears in the display:
– A maximum 19 letters can be counted.
– The machine stops automatically at the beginning of the
tape.
– The flashing number on the display shows the total dictation
time and the number of dictations.
Switch the machine to »Start«. The first letter and the
remaining dictation time will appear in the display. The
remaining dictation time shown on the display counts back-
wards.
– The second letter and the remaining dictation time are dis-
played as soon as the first letter is over.
– The following appears in the display:
Note:
When switching the dictation machine on and off, the
dictation counter is not automatically reset. If a mains failure
occurs, the dictation counter is automatically reset to zero (0).
________________________________________
REWIND « button:
been rewound
not
min LETTER
min LETTER
min
LETTER
PLAY
«
7 7