DICTATION COUNT
Letter quantity, length and remaining dictation
time
The end of the letter must be marked during dictation in order to
register on the display.
Insert a recorded steno-cassette that has
into the tape compartment.
If the steno-cassette has not been removed from the
compartment since turning the unit on, press th »EJECT
button and close the compartment manually.
– The counter is reset to zero (0).
Press the »
– The tape rewinds to the beginning.
– The end-of-letter marks that were set during dictation
are counted and stored.
– Index marks are not stored.
– The following appears in the display:
– A maximum 19 letters can be counted.
– The machine stops automatically at the beginning of the
tape.
– The flashing number on the display shows the total dictation
time and the number of dictations.
Switch the machine to » START«. The first letter and the
remaining dictation time will appear in the display. The
remaining dictation time shown on the display counts back-
wards.
– The second letter and the remaining dictation time are dis-
played as soon as the first letter is over.
– The following appears in the display:
Note:
When switching the dictation machine on and off, the
dictation counter is not automatically reset. If a mains failure
occurs, the dictation counter is automatically reset to zero (0).
12
________________________________________
REWIND « button:
not
been rewound
min LETTER
min LETTER
min
LETTER
PLAY
«