Reversing The Door - Thermo Scientific ES Serie Manual De Usuario

Reversing the door

In order to reverse the door please follow the below instructions. This should be carried out by 2
people for safety purposes.
1. Tilt the freezer backwards by 45° and lean on a vertical, hard surface such as a wall.
2. Remove the feet from the bottom, right hand hinge (figures 1 and 2).
3. Remove the screws from the hinge (figure 3) and remove hinge.
Figure 1 Figure 2 Figure 3
4. Pull the door from the bottom to remove from the freezer.
5. Remove the top, right hand hinge (figure 4).
6. Install the hinge on the top, left hand side (figure 5).
Figure 4 Figure 5
7. Remove the bottom, left hand feet and base plate (figures 6 and 7).
Figure 6 Figure 7
13