Maintenance And Care; Servicing Guidelines - Echo MTA-PP/E Manual De Instrucciones

Observe the following precautions when checking and maintaining your product after use:
 Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
 Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
 For spare parts and consumables, please use only genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a malfunction.

Servicing guidelines

Area
Drive shaft
Guide Bar / Sprocket Nose Inspect/Clean/Lubricate
Saw Chain
Screws/Nuts/Bolts
Maintenance procedure letter codes: I= Inspect, R= Replace, C= Clean
(1) Apply good quality lithium grease every 25 hours of use.
* All recommendations to replace are based on the finding of damage or wear during inspection.
 Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

Maintenance and care

If you have any questions or problems, please contact your dealer.
Lubricating drive shaft
IMPORTANT
Maintenance
Inspect/Grease
Inspect/Sharpen/Replace/
Tension
Inspect/Tighten/Replace
IMPORTANT
Maintenance and care
Maintenance and care
WARNING
Page Daily or be-
fore use
13
14 I / C *
9/15 I *
- I *
1. Remove cutting attachment locater screw (A).
2. Loosen two bolts (B).
3. Remove cutting attachment assembly.
4. Remove flex cable (C), wipe clean and apply 15 ml of lithium
based grease.
5. Slide the flexible cable back in the drive housing. Do not get
dirt on the flex cable.
6. Install and secure cutting attachment assembly.
13
Every refuel 3 months or
90 hours
I(1)
I
I *
Yearly 600
hours