Tabla de contenido
NS-SB314 Altavoz de barra de sonido para cine en casa Sistema con Bluetooth
Montaje de su barra de sonido en una pared
(opcional)
Usted necesitará:
LEVELING EDGE
Hold a level to the Leveling Edge of this template
LEVELING EDGE
Drill a hole here
20.43 inches (519 mm)
Drill a hole here
Select a location close to your TV and directly in
Position the wall mount template on the wall where you
Drill two holes in the wall where the template indicates,
Wall
Soundbar
front of the viewing/listening position. For best
want to mount your soundbar, level the template, then
then remove the template.
Approx. 1/4 in
Tools Needed
sound quality, choose a location where sound waves
are not blocked by furniture or other obstacles.
tape it to the wall.
Wall
Wall
Wall
(6.8 mm)
Wall mount template
Secure two screws (not included) to the wall or wall anchors
Wall
Wall
Anchor
(if required). The screws must protrude from the wall by
Position holes onto studs behind drywall or use anchors for mounting
anchors (2)
If you are mounting on drywall or concrete, insert wall
anchors (not included) into the holes and use a hammer
about 1/4". Use a #10 wood screw (or similar), 1 1/2" in
length. The screw width must be about 3/16" and the screw
Align the speaker hanging brackets with the screws,
Warning: Improper installation can result in serious injury or damage to your soundbar.
If necessary, seek the assistance of a professional.
Screws (2) - #10 x 1 ½"
Note: Make sure that the template is level.
to make sure that the anchors are flush against the wall.
head must be approximately 1/4" to 3/8".
then hang the soundbar on the screws.
wood screw (or similar)
V1 14-0130
Plantilla de montaje en pared
Martillo
Destornillador
1 Seleccione una ubicación cerca de su televisor y
directamente enfrente de la posición de
vista/escucha. Para obtener la calidad de sonido
óptima, elija una ubicación donde las ondas
sonoras no se ven bloqueadas por muebles u
otros obstáculos.
2 Determine donde desea colocar la plantilla de
montaje incluida en la pared donde quiere
montar la barra de sonido. Asegúrese de que la
plantilla esté a nivel (A), después pegue la
plantilla a la pared con cinta adhesiva (B).
A
LEVELING EDGE
Hold a level to the Leveling Edge of this template
LEVELING EDGE
Drill a hole here
20.43 inches (519 mm)
Drill a hole here
Select a location close to your TV and directly in
Position the wall mount template on the wall where you
Drill two holes in the wall where the template indicates,
Wall
Soundbar
front of the viewing/listening position. For best
want to mount your soundbar, level the template, then
then remove the template.
Approx. 1/4 in
sound quality, choose a location where sound waves
are not blocked by furniture or other obstacles.
tape it to the wall.
Wall
Wall
Wall
(6.8 mm)
Wall mount template
Secure two screws (not included) to the wall or wall anchors
Wall
Anchor
(if required). The screws must protrude from the wall by
Position holes onto studs behind drywall or use anchors for mounting
If you are mounting on drywall or concrete, insert wall
about 1/4". Use a #10 wood screw (or similar), 1 1/2" in
Warning: Improper installation can result in serious injury or damage to your soundbar.
Note: Make sure that the template is level.
to make sure that the anchors are flush against the wall.
anchors (not included) into the holes and use a hammer
length. The screw width must be about 3/16" and the screw
head must be approximately 1/4" to 3/8".
Align the speaker hanging brackets with the screws,
then hang the soundbar on the screws.
If necessary, seek the assistance of a professional.
3 Taladre dos agujeros en la pared donde lo indica
la plantilla, después retire la plantilla.
4 Coloque los anclajes para pared (no incluidos)
en los agujeros que taladro, usando las
instrucciones que vinieron con los anclajes.
Notas
•
Si ha taladrado en una viga los anclajes no son
necesarios.
•
Si no puede taladrar en las vigas de la pared,
concreto, u otro tipo de pared, se requieren los
anclajes. Refiérase a las instrucciones que
vienen con los anclajes para pared para
determinar el tamaño de la broca.
Detector de vigas
Nivel
(opcional para
instalación en
vigas de madera)
Tornillos (2) - Tornillo
Cinta métrica
para madera N.° 10 de
1 1/2 pulg. (o similar)
Cinta
Anclajes para pared (2)
adhesiva
B
LEVELING EDGE
LEVELING EDGE
Hold a level to the Leveling Edge of this template
Drill a hole here
20.43 inches (519 mm)
Select a location close to your TV and directly in
Position the wall mount template on the wall where you
Drill two holes in the wall where the template indicates,
Wall
Soundbar
front of the viewing/listening position. For best
want to mount your soundbar, level the template, then
then remove the template.
Approx. 1/4 in
Tools Needed
sound quality, choose a location where sound waves
tape it to the wall.
Wall
Wall
(6.8 mm)
Wall mount template
are not blocked by furniture or other obstacles.
Wall
Wall
Wall
Anchor
(if required). The screws must protrude from the wall by
Secure two screws (not included) to the wall or wall anchors
Position holes onto studs behind drywall or use anchors for mounting
anchors (2)
If you are mounting on drywall or concrete, insert wall
about 1/4". Use a #10 wood screw (or similar), 1 1/2" in
Warning: Improper installation can result in serious injury or damage to your soundbar.
Screws (2) - #10 x 1 ½"
anchors (not included) into the holes and use a hammer
to make sure that the anchors are flush against the wall.
length. The screw width must be about 3/16" and the screw
head must be approximately 1/4" to 3/8".
then hang the soundbar on the screws.
Align the speaker hanging brackets with the screws,
If necessary, seek the assistance of a professional.
wood screw (or similar)
Note: Make sure that the template is level.
V1 14-0130
www.insigniaproducts.com
5 Fije dos tornillos (no incluidos) a la pared o
anclajes para pared (si se requieren). Los
tornillos deben sobresalir de 1/4 pulg.
aproximadamente de la pared. Use un tornillo
para madera N.° 10 (o similar), de 1 1/2 pulg. de
longitud. El ancho del tornillo debe ser de 3/16
pulg. y la cabeza debe ser aproximadamente de
1/4 a 3/8 pulg.
Taladro y
broca
20.43 pulg. (519 mm)
CUIDADO
6 Alinee los soportes para colgar el altavoz con los
tornillos y cuelgue la barra de sonido en los
tornillos.
Drill a hole here
Tools Needed
Wall
anchors (2)
Screws (2) - #10 x 1 ½"
wood screw (or similar)
V1 14-0130
Advertencia
Pared
Si necesita montar la barra de sonido en un panel de
yeso, una pared de concreto o tipo similar, asegúrese
de usar anclajes para pared que sean adecuados para
su tipo de pared.
una instalación inadecuada podría resultar en
lesiones graves o daños a su barra de sonido. Si es
necesario, busque la asistencia de un profesional.
Aproximadamente
1/4 pulg. (6.8 mm)
9
Tabla de contenido
