Idiomas disponibles
Idiomas disponibles
ENGLISH
-
To select Fan mode, press MODE until (
DRY mode
3.
-
This function reduces the humidity in the air to make the room more comfortable.
-
To select DRY mode, press MODE until (
with automatic pre-setting is activated.
Automatic mode
4.
-
Under automatic mode, the operating mode will be automatically set according
to the ambient temperature.
-
To select Auto mode, press MODE until (
HEAT mode
5.
-
The heating function allows the air conditioning to heat the room.
-
To enable the HEAT function, press MODE until the (
display.
-
Use the (
) or (
Warning: in heating operation, the appliance may automatically activate a defrost
cycle, which is essential to clear frost on the condenser to recover its heat exchange
function. This procedure usually takes 2 to 10 minutes. During defrosting, the indoor
unit fan stops running. After defrosting, it returns to heating mode automatically.
FAN SPEED function (FAN button)
6.
-
Change the fan operating speed.
-
Press FAN to adjust the speed of the running fan. It can be set to automatic speed:
Child lock function
7.
1.
Hold down
2.
Under this function, no button will be activated.
TIMER function, timer on
8.
-
To switch the device on automatically.
-
When the unit is switched off, you can activate TIMER ON
104
EVVO CLIMA 9000/12000/18000/24000
) button to set a temperature greater than room temperature.
and
to enable this function and press them again to disable it.
) appears on the display.
) appears on the display. A function
) appears on the display.
) symbol appears on the
