Idiomas disponibles
Idiomas disponibles
8.0 - WARRANTY
The warranty conditions established with the manufacturer at the time of supply apply.
For damage caused by:
• Improper use of the device;
• Non-compliance with the requirements indicated in this document;
• Non-compliance with the installation rules;
• Tampering, modification and use of non-original spare parts;
no claims under warranty or damages can be requested.
Maintenance work, the assembly of equipment from other manufacturers, modification of the deviceand natural wear are also
excluded from the warranty.
9.0 - PLATE DATA
The plate (see example opposite) shows the following data:
• Name/logo and address of the manufacturer (any name/distributor logo)
• Mod.:
= name/model of the device followed
• CE-51DO5109
= certification pin number
• Cl. ...
= Holding force in counter flow
• Gr. 2
= Mechanical resistance group 2 according to EN 161
• EN 161
= Product reference standard
• P.max
= Maximum pressure at which the functioning of the product is guaranteed
• PS
= Maximum permissible pressure
• IP....
= Degree of protection
• 230V....
= Power supply voltage, frequency (if Vac), followed by the electrical absorption
Example of electrical absorption indication: 66/19 VA indicates 66 VA at inrush, 19 VA at steady state
• TS
= Temperature range at which the operation of the product is guaranteed
•
= Compliance Regulation 2016/426 followed by the number of the Notified Body
0051
•
= Compliance Dir. PED followed by the number of the Notified Body
0497
• year
= Year of manufacture
• Lot
= Product serial number (see explanation below)
• U2028
= Outgoing batch year 2020 week no. 28
• 14613
= progressive order number referring to the year indicated
• 00001
= progressive number referring to the quantity of the batch
EVF-1-3-6 - EVR-1-3-6
by the connection diameter
(A = 150 mbar or 15 kPa - B = 50 mbar or 5 kPa) according to EN 161
16
Madas Technical Manual - 1|1.5e - REV. 1 of 18
Oct 2023
th
