Idiomas disponibles
Idiomas disponibles
3. Switch off the cooler.
4. Leave the lid open.
5. Wipe off the defrosted water.
Replacing the AC fuse
DANGER! Electrocution hazard
Disconnect the power supply and the connection cable before replacing the AC fuse.
1.
Disconnect the power supply to the cooler.
2. Pull off the connection cable.
3. Pry out the fuse insert
4. Replace the defective glass fuse with a new one that has the same type and rating (4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.
Replacing the DC plug fuse
NOTE There is an additional DC fuse inside the device (Automotive standard blade fuse, 10 A). This fuse
can only be replaced by an authorized repair center.
1.
Unscrew the contact pin housing
2. Replace the defective fuse
Acting, 10 A).
(Fig.
on page 9 2) with a screwdriver.
(Fig.
on page 17 3) from the plug
(Fig.
on page 17 2) with a new fuse of the same type and rating (3AG, Fast
CFX2 28, CFX2 37, CFX2 45, CFX2 57 EN
(Fig.
on page 17 1).
17
