Idiomas disponibles
Idiomas disponibles
Connecting the cooler
Connecting to a battery
NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove
the fused DC plug. Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery before connecting the battery to
a quick charging device. Overvoltage can damage the electronics of devices connected to the bat-
tery.
NOTE The cooler is equipped with an electronic system to prevent polarity reversal. The electronic sys-
tem protects the cooler against short-circuiting when connected to a battery.
The cooler can be operated with 12 V or 24 V .
Connect the cooler to a battery usig the DC connection cable as shown.
Connecting to an AC power supply
DANGER! Electrocution hazard
• Never handle plugs and switches with wet hands or if you are standing on a wet surface.
• If the cooler is operated on board a boat from an AC power supply, a residual current circuit breaker
must be installed between the AC power supply and the cooler. Seek advice from a trained techni-
cian.
CFX2 28, CFX2 37, CFX2 45, CFX2 57 EN
11
