Idiomas disponibles
Idiomas disponibles
Connectivity
Connection type
Profiles supported
Wireless RF frequency
Up to 33ft-49ft* (Up to 10m-15m*)
Wireless range
Battery
Single earbud battery
Charging case battery
Charging connection type
Wired charging rate
Charging case + earbud
charging total time
Earbud only battery
charging time
Charging case only
battery charging time
# of charging case cycles
before battery runs out
Earbuds total run time
(including cycles)
Earbud only battery
runtime
Battery standby time
Additional information
Dimensions (WxH)
2 x 0.98 x 1.8 in (52 x 25 x 46 mm)
Weight
Cable length
Earbuds, charging case, user guide, Type
Package contents
C charging cable, insert with cleaning
* Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight between devices.
** Battery runtime can last 6.5 hours per charging cycle (3) for an estimated total of 20 hours combined.
*** Depending on the volume level and type of music file being played.
®
, V5.3
Bluetooth
HFP, A2DP, AVRCP
2.402-2.480GHZ
30mAhx2 Lithium battery
260mAh Lithium battery
Type C charging port
5V/1A, 5W
3 hrs
1.5 hrs
2 hrs
3 cycles
Up to 20 hours**
(Music & 10 hours of calls)
Up to 6.5 hours (50% volume)***
About 100 hrs
1.06 oz (30.2gs±1gs)
11.8 in (30 cm)
instructions
FCC statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
