KlipXtreme TuneXbuds KTE-007 Manual página 4

Idiomas disponibles

Idiomas disponibles

LED indicators on the charging case
or earbuds
Part
Status
Charging
Earbuds
Charged
LED signals
Fully charged (inside
charging case when
the USB power cable
is disconnected)
Pairing
Paired
Power off
Charging
Charging case
LED signals
Charged (with charging
(at the bottom
cable connected)
of the case)
Charged (with charging
cable disconnected)
Charging earbuds
autonomously
(with charging cable
disconnected)
LED Function
Blinking red
Off
Blue light for a few moments
and then off
Blinking red/blue LED until
paired or timed out. Once
paired, LED will turn off.
Off
Blink in red momentarily and
then turn off
Blinking red
Solid red
Blue light for a few moments
and then off
Solid blue
3. Basic operation
3.1 Charging the case and earbuds.
1. To charge the case, plug the supplied USB cable
into a power source and the Type C end in the
case's charging port. The case starts charging
automatically. The LED indicator at the bottom of
the case will start blinking red.
2. Once the case is fully charged the LED indicator
will turn solid red.
3. Unplug the charging case from the power source.
4. When the earbuds are being charged inside the
case, their LED indicators light up in red. When fully
charged, the LED indicators on the earbuds turn
off.
Note: The total charging time for the charging
case and the earbuds, when they are both
connected to a power outlet, is around three
hours. It will take about 1.5 hours for the earbuds
to fully charge inside the case, when it is already
fully charged and disconnected.
5. The fully charged earbuds have up to 6.5 hours of
playtime or up to 100 hours of standby time.
However, these runtimes may vary depending on
the mobile device being used, the usage profile, and
the type of files being played.
6. A low battery prompt will be heard to let you
know that the battery is below the acceptable level
to continue operating properly.
loading