Stihl HS 85 Manual De Instrucciones página 21

English / USA
: Pull the rope through the rotor and
secure it with a simple overhand
knot.
:
Lubricate rope rotor bore with
non-resinous oil.
:
Push rotor onto the starter post –
turn back and forth until loop (6) of
rewind spring engages.
:
Insert screw and tighten down
securely.
Go to "Tensioning rewind spring".
20
Replacing a broken rewind spring
: Lubricate the new spring with a few
drops of non-resinous oil, do not
open the wire retainer
:
Remove the rope rotor.
:
Remove parts of old spring.
:
Fit the new spring –
position outer spring loop in the
recess –
the wire retainer slips off in this
process.
a = 2mm
(0.08in)
If the spring has popped out:
Refit it in the counterclockwise
direction, starting outside and
working inward.
:
Install the rope rotor.
:
Check dimension "a" on inner
spring loop and bend it to size if
necessary.
:
Go to "Tensioning the rewind
spring".
HS 85