Idiomas disponibles
Idiomas disponibles
WarnInG:
ALWAYS check your bottle jack to make sure it is working properly prior to actual use. If it
does not appear to be working properly, troubleshoot prior to actual use. Bleeding the bottle
jack is recommended when it does not appear to be working properly.
WarnInG:
Change your hydraulic fluid — we recommend a minimum of once every three years.
WarnInG:
DO NOT EXEED the stated limit or operate the jack beyond its rated capacity.
WarnInG:
neVer Use tHIs Press IF anY Part oF It seems to Be DamaGeD or
malFUnCtIonInG!
tHIs Can Be HIGHlY DanGeroUs!
General saFetY rUles
■ Work area conditions. Cluttered areas invite injuries.
■ additional work area conditions. Do not use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lit.
■ Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools or extension cords.
■ store idle equipment. When not in use tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep them out of the reach of children.
■ Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and safer at the rate for which it was intended. Do not
modify this tool and do not use this tool for a purpose for which it was not intended.
■ Dress properly. Do not wear loose clothing or jewelry as they can get caught in
moving parts. Protective, electrically non-conductive clothing and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
■ Use eye protection. Always wear impact safety glasses underneath a full face shield
during use. Also wear heavy duty work gloves.
■ Do not over reach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
■ maintain tools with care. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. The handles must be kept
clean, dry and free from oil and grease at all times.
■ remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before starting work.
■ stay alert. Watch what you are doing. Use common sense. Do not operate any tool
when you are tired.
45
