button lights up continuously and the zone selection button flashes.
The
Press the zone selection button (27).
Then press the
(15).
button lights up continuously and the zone selection button flashes.
The
When the Sync Finish function is active, the fryer drawer pause function
is not available.
Interrupting the programme for both fryer drawers
Press the
button (29) to interrupt the cooking process for both fryer drawers
(15/18).
The
button (29) stops flashing and a signal tone is emitted.
Pull out the fryer drawer (15/18) to check cooking progress or to redistribute the
food.
Place the fryer drawer fully back into the appliance.
Press the
button (29) again to continue the cooking process.
The time then continues automatically.
.. Switch lighting on/off
Press the button
Press the button
Press the button again to switch off the light.
.. Ending the programme
At the end of the cooking time, the heating element switches off and signal tones
are emitted.
If you want to completely abort the cooking for both zones, press and hold the
standby button
Pull the mains plug (8) out of the mains socket.
Pull the fryer drawers (15/18) out of the appliance using the handles (2/5). Place
the fryer drawers on a heat-resistant surface.
Remove the food from the fryer drawers (15/18) using a suitable utensil.
button (29) to interrupt the cooking process for fryer drawer
(35) to switch on the light in zone 1.
(28) to switch on the light in zone 2.
(30) until the appliance switches off.
DE
FR
NL
ES
IT
EN
197