Idiomas disponibles
Idiomas disponibles
Press the standby button
Press the zone selection button (36) to configure the settings for fryer drawer
(18).
or
Press the zone selection button (27) to configure the settings for fryer drawer
(15).
Press the corresponding automatic programme button (33) to set the automatic
programme you require.
The temperature and cooking time for the selected programme are shown alter-
nately on the display.
Start the cooking process by pressing the
The
button and the symbol for the selected automatic programme flash during
the cooking process.
At the end of the cooking time, the heating element switches off and signal tones
are emitted.
You can adjust the cooking time and cooking temperature at any time
later (see "8.1. Setting the cooking time and temperature").
To ensure that food is cooked to perfection, preheat the air fryer for at
least 3 minutes beforehand with the
gramme.
To avoid heat loss, we recommend starting the cooking process only
once both drawers have been fully inserted.
.. Using the Dual Cook function
The Dual Cook function is used to cook a larger amount of the same food or differ-
ent foods at the same cooking temperature for the same cooking time.
Press the standby button
Press the
DUAL COOK (33) button to select the Dual Cook function.
Press the DIY button (26) to make the setting manually, or select an automatic pro-
gramme. By default, a cooking time of 15 minutes and a temperature of 180 °C are
set for both zones in the manual setting.
You can individually adapt an automatic programme or the default setting specified
above for each zone to suit your recipe (see also '8.1. Setting the cooking time and
temperature' on page 190).
Start the cooking process by pressing the
The same settings are used in both zones. The
(33) flash during the cooking process.
194
(30) to switch on the appliance.
(30) to switch on the air fryer.
button (29).
PREHEAT automatic pro-
button (29).
DUAL COOK buttons
and
