Idiomas disponibles
Idiomas disponibles
De-scaling
Limescale deposits endanger the function of the appliance.
Therefore, the appliance must be descaled regularly. The
intervals between descaling depend on the hardness of the
water and the frequency of use.
The appliance must be descaled at the latest when the
control lamps for the small and large espresso cups flash
alternately.
Descale with a commercially available descaling agent, as
recommended for coffee machines with a milk system.
1. Follow the dosage instructions on the packaging or
package insert. Pour the descaler into the water and
milk tanks.
2. Fill the water tank with 500 ml of clean, fresh water.
Close the lid of the water tank.
3. Fill the milk tank with 300 ml of clean, fresh water and
reinsert the milk tank with the cover.
4. Insert the filter holder.
5. Set the control on the top of the milk tank to position .
6. Swivel the milk nozzle outwards with the adjustment
lever on the milk tank.
7. Place a suitable container (heat-resistant / approx.
700 ml) under the brewing head. If necessary, change
the length of the milk nozzle as previously described.
- You also have time to change the container between
cleaning processes if you do not have a suitable
700 ml container to hand.
Problem
The appliance has no function. The appliance has no power supply.
There is no more coffee
running in.
The pump makes loud noises.
PC-ES-KA1266_IM_01.2024
Troubleshooting
Possible Cause
The appliance is defective.
The water tank is empty.
The water tank is not inserted correctly,
the valve is not open.
The holes in the filter holder and the
outlet on the brew head are blocked.
The coffee powder is too fine or has
been pressed on too firmly.
The appliance is calcified.
The water tank is empty.
The water tank is not inserted correctly,
the valve is not open.
8. Switch on the appliance and wait until all control lamps
light up.
9. Press and hold buttons (1) and (4) simultaneously for at
least 4 seconds. All six control lamps light up alternately
in an anti-clockwise direction and the appliance starts
descaling. The process takes approx. 5 minutes and is
paused several times.
- When the last process is complete, several beeps
sound. Steam is then generated. Descaling is com-
plete when all control lamps light up again.
WARNING:
• Rinse out the water and milk tank and refill with water.
Run through a large cup of espresso twice and a large
cup of caffè latte twice. This removes residues of the
descaling agent.
• Do not use this water for consumption.
Storage
• Clean the appliance as described. Allow the accessories
to dry completely.
• We recommend storing the appliance in its original
packaging if you do not intend to use it for a longer
period of time.
• Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Remedy
Check the power socket with another
appliance.
Insert the mains plug correctly.
Check the house fuse.
Contact our service or a specialist.
Switch off the Appliance!
Fill the water tank with fresh water.
Press the water tank firmly on the upper side
until it locks into place.
Clean the filter holder, the filter and the outlet
on the brew head.
Loosen the coffee powder. Distribute it evenly
and press it only lightly with the tamper.
Descale the appliance as described.
Switch off the Appliance!
Fill the water tank with fresh water.
Press the water tank firmly on the upper side
until it locks into place.
21
03.01.24
