4 Trimmer head on/off button
5 Length selector
6 Trimming guard
7 Small plug inlet
8 Power plug
9 Small plug
10 Brush
Charging
Charging takes approx. 1 hour. Charge the
product before you use it for the first time and
when the display flashes orange to indicate
that the battery is almost empty.
- Charging or using the product at
temperatures below 40 °F / 4.5 °C or higher
than 95 °F / 35 °C adversely affects the
lifespan of the battery.
- If the product is subjected to a major
change in temperature, pressure or
humidity, let the product acclimatize for 30
minutes before use.
1 Make sure the product is switched off.
2 Raise the inlet cover and insert the small
plug into the product (Fig. 2). Put the
power plug in any 120V-240 AC outlet.
3 After charging, remove the power plug
from the power outlet and pull the small
plug out of the product. Put the inlet cover
back in place.
Battery status indications
- When the battery is almost empty, the
battery status indicator flashes orange (Fig.
3).
- When the product is charging, the battery
status indicator flashes green (Fig. 4).
- When the battery is fully charged, the
battery status indicator lights up green
continuously.
Note: Approx. 30 minutes after the battery is
fully charged, the battery status indicator
switches off automatically.
Operating time
When the product is fully charged, it has a
cordless operating time of up to 80 minutes.
Using the product
You can use the product wet or dry to shave or
trim hair on all parts of the body below the
neckline.
Always check the product and all
accessories before you use it. Do not use
the product or any accessory if it is
damaged, as this may cause injury. Always
replace a damaged part with one of the
original type.
- Use this product for its intended household
use as described in this manual.
- For hygienic reasons, the product should
only be used by one person.
- Trimming is easier when the skin and hair
are dry.
- Clean the product after each use (see
'Cleaning').
Note: For safety reasons, this product can only
be used without cord (Fig. 5).
Trimming
Note: Do not use the trimmer head on
sensitive areas without the trimming guard. As
the trimmer head may become warm during
extended use, it is recommended to always
have the trimming guard attached when you
use the appliance.
- If you are trimming for the first time, be
careful. Do not move the product too fast.
Make smooth and gentle movements.
- When you trim for the first time, use
trimming setting 7 (9/32 in./7 mm) to
familiarize yourself with the product.
- Since hairs do not all grow in the same
direction, you may want to try different
trimming positions (i.e. upwards,
downwards, or across). Practice is best for
optimum results.
- Always make smooth and gentle
movements and be sure the surface of the
guard always stays in contact with your
skin.
- For body trimming, make sure hair is clean
and dry, as wet hair tends to stick to the
body.
- Always use the guard attachment when
trimming sensitive areas.