hager XEV601C Inicio Rápido página 4

z
1. Initial precautions
Please refer to the maintenance manual
before starting the installation of the charging
station. This device is to be installed only by
a professional electrician fitter according to
local applicable installation standards.
Conform to SELV installation rules.
All information pertaining to the installation
(assembly, electrical connection and
configuration), connection to the servers as well
as the use and maintenance of the terminals
are provided in the USB key provided with the
terminals and on the Hager website of your
country.
Correct Disposal
product
(Waste Electrical & Electronic
Equipment).
(Applicable in the European Union and other
European countries with separate collection systems).
This marking shown on the product or its literature
indicates that it should not be disposed with other
household waste at the end of its working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product, or their local government
office, for details of where and how they can take this
device for environmentally safe recycling.
Business users should contact their supplier and check
the terms and conditions of the purchase contract. This
product should not be mixed with other commercial
wastes of disposal.
M
Usable in all Europe and in Switzerland
3
QuickStart
2. General description of the charging station
3. Technical data
of this
z
Environmental conditions
Temperature
Humidity
Protection
Electrical characteristics
Voltage
Frequency
Maximum power load
Class of electrical protection
Mechanical characteristics
Weight
Height
Breadth
Depth
RFID
Compatible RFID technologies
Strip light
RFID Card Reader
Socket: Mode 3 Type 2S
Socket: Mode 2
Optional: integration of a modem
Energy meter (version-specific)
The outer casing can be removed
by unscrewing two screws
Optional: base
Optional integration of a protective casing
-25°C to +40°C
5% to 95%
IP 54 – IK 10
230V / 400V (3-phase Version) +/- 10%
50 Hz +/- 1%
32A - 7kW (1-phase Version)
32A - 22kW (3-phase Version)
Class 1
30 kg
765 mm
355 mm
202 mm
Mifare 1k
Mifare 4k
Mifare Ultralight NTAG203
6LE002954A