Idiomas disponibles
Idiomas disponibles
EN
20
SETUP AND OPERATION
Notes on setup and operation
•
Choose a safe location and avoid placing the unit in direct sunlight or
near a heat source.
•
Avoid environments subject to vibration, excessive dust, cold or
humidity.
•
Do not open the housing as there is a risk of electric shock. If a foreign
object accidentally gets inside the unit, contact your dealer.
•
Do not attempt to clean the unit with chemical solvents as this may
damage the surface. A clean, dry cloth is recommended for cleaning.
•
Keep these instructions for future reference.
First steps
•
Connect the main unit and the speakers with the RCA cable.
•
Plug the DC plug of the mains adapter into the DC IN connection on the
back of the unit.
•
Insert the plug of the power supply unit into the mains socket.
Phono mode
1.
Set the function knob to PH mode. Turn the power switch on. The
display will now flash red.
2. Place a record on the turntable and select the desired speed (33/45/78)
according to the requirements of the particular record.
NOTE: If you want to play a 45 RPM record, use the supplied 45 RPM
adapter.
3. Remove the needle guard. Unlock the tone arm holder to release the
tone arm. Push the cueing lever backwards to raise the tone arm and
carefully move the tone arm to the desired position above the record.
The turntable starts to rotate when the tone arm is moved towards the
record. Push the cueing lever forward to slowly lower the tone arm to
the desired position on the record and play the record.
NOTE: The record will only start to spin if the tone arm is moved towards
the record when the automatic shut-off is on.
4. If the auto-stop control switch is set to "ON", the record will stop
automatically when it finishes playing. If the auto-stop control switch
is set to "OFF", the record will not stop automatically when it finishes
playing.
