Vortice VORT HRI 200 PHANTOM BP IoT Manual De Instrucciones página 54

ENGLISH
9.2 O peration from the Vorticenet cloud via browser (Wi-Fi connection)
1. Go to www.vorticenet.it and log in with the previously set credentials.
2. Select "Installation List" in the drop-down menu on the left of the screen and open your system.
Installation name:
VORT HRI 200 PHANTOM B
Inlet temperature Exhaust temperature
Bypass ON
Manual
Unit mode
Unit state
Note 1: In order to open the system, the connection must be "online". If the connection is "offline", it is necessary to
intervene manually on the remote control panel by pressing and holding (approx. 4s) the ON/OFF button
Note: When the appliance enters 'NO FROST' mode, the
9.2.1 Meaning of icons
Inlet temperature
• Intake temperature: Temperature detected by the intake probe (in position "C" in fig. 2).
• Exhaust temperature: Temperature detected by the exhaust probe (in position "D" in fig. 2)
• Supply temperature: Temperature detected by the supply probe (in position "A" in fig. 2)
• Extraction temperature: Temperature detected by the extraction probe (in position "B" in fig. 2).
0 %
Supply air filter - depletion
• Filter clogging percentage (both supply and extraction; this is a percentage value that takes into account operating time
and operating speeds. Refer to figure 2 for filter positioning).
50 %
Supply
• Percentage speed of motors ('Supply' and 'Extraction' motor).
Bypass OFF Bypass ON
• Status of the bypass damper (ON or OFF).
54
Serial number Address:
1006859209
Supply temperature
MIN
Current gear
Exhaust temperature
Extracted air filter - depletion
50 %
Extract
State:
No alarms
Supply air filter - depletion
Extraction temperature
23°C
Holiday mode
Temperature of comfort
icon appears next to the bypass icon.
Supply temperature
0 %
Connection:
online
0 % 0 %
Extracted air filter - depletion
Schedule
Extraction temperature
Open
50 % 50 %
Supply Extract
.