Idiomas disponibles
Idiomas disponibles
OPERATION
Control panel
display window
Display
1.
A two-digit digital screen displays the set temperature or actual temperature.
2.
"Heating/Warming" function light: the red light is on for normal heating, and
it flashes under antifreeze heating.
Green light is on when keeping warm.
3.
Electronic Anode "function light: The light is always on when the electronic
magnesium rod is working normally, and it flashes when it is abnormal.
4.
"Wifi" function light: it lights up according to the actual situation. If it is not
connected to the network for a long time (30s), the WIFI icon does not light
up.
Operating instruction
1.
"Power" button: Shortly press this key in the standby state after power on,
the system is turned on immediately with the previous reserved parameters.
When the machine is on, press this key and the system will switch to standby.
Press and hold for 3 seconds when power is on, it would transfer to the WiFi
network mode.
2.
"Temp" button: under instant heating mode, tap this button to increase the
set temperature. The temperature would increase by 1 °C each time. Long
press the key to increase the data rapidly (5 times/S), the temperature range
would be from 30°C to 75°C (it would jump to the lower limit when adjusted to
over the upper limit).
3.
"Setting" button: When pressing this button after turning on the machine, it
could choose "Anti-Bacteria" or "Instant heating" working mode.
touch screen buttons
EN
25
